Return to site

Li ion Batteries – Everything you need to know about your smartphone’s battery

Practically all of the batteries that our gadgets currently assemble, including smartphones, are lithium-
ion batteries. These batteries are an evolution over the old nickel, cadmium, and lead, and although in
recent times have suffered stagnation in their evolution due to the limitation of this technology, it is still
the most efficient way to keep our devices turned on.

To know how to take care of a battery, and interestingly, all ideas are different from one individual to
another. The tricks or methods that we usually hear do not improve or worsen, for the most part, the
capabilities of the batteries.

CHARACTERISTICS AND CARE OF THE LITHIUM BATTERIES

Lithium batteries are usually charged above 40% for safety since it is the recommended capacity to keep
the battery unused for a long time. If we want to store a battery for a long time, it is advisable to charge
it over 40%.
The lithium battery of any modern device is prepared to be used generally from the first moment, so it is
not necessary to charge it in a prolonged way or to discharge it completely. The battery will gain
capacity as the first charge, and discharge cycles are consumed until reaching its maximum, and then
begin to lose efficiency.
Li ion battery manufacturers in India told that the charging cycles of the battery are not homogeneous.
This means that it is not recommended to charge the battery always from the same load percentage,
but it is best to start charging from different measurements.
It is not necessary to let a lithium battery charge 100% before unplugging it is irrelevant since it will not
improve or worsen anything. Lithium batteries do not suffer the memory effect.
We should never fully discharge a lithium battery unless we are going to calibrate it, and in fact, we
should not let our batteries go down by 5% capacity as a general recommendation.
Another general recommendation by battery management system suppliers in India is that lithium
batteries should be unplugged once they reach their maximum charge. Maintaining them at maximum
load for a long time is inadequate and harmful since when using the device plugged in, and with a full
charge, it will heat up losing efficiency. This is perhaps the most common practice and the one that most
spoils our battery.

We must pay attention to the characteristics of the chargers we use. As a general rule of Li Ion Battery
Manufacturers
like mora, we must always use the specific charger of our mobile, although we
can use other chargers taking care that the values of voltage and intensity are correct. The load intensity
is what the terminal demands, so we should never use a charger of less intensity than the series since
the charger itself would overheat with the risk of explosion.

 

ALSO READ: The role of the lithium-ion battery in the automotive industry and everyday life

We must pay attention to the characteristics of the chargers we use. As a general rule of Li Ion Battery
Manufacturers
like mora, we must always use the specific charger of our mobile, although we
can use other chargers taking care that the values of voltage and intensity are correct. The load intensity
is what the terminal demands, so we should never use a charger of less intensity than the series since
the charger itself would overheat with the risk of explosion.